Optical manipulation of charged microparticles in polar fluids

In this study, we report a systematic study of the response of a charged microparticle confined in an optical trap and driven by electric fields. The particle is embedded in a polar fluid, hence, the role of ions and counterions forming a double layer around the electrodes and the particle surface itself has been taken into account. We analyze two different cases: (i) electrodes energized by a step‐wise voltage (DC mode) and (ii) electrodes driven by a sinusoidal voltage (AC mode). The experimental outcomes are analyzed in terms of a model that combines the electric response of the electrolytic cell and the motion of the trapped particle. In particular, for the DC mode we analyze the transient particle motion and correlate it with the electric current flowing in the cell. For the AC mode, the stochastic and deterministic motion of the trapped particle is analyzed either in the frequency domain (power spectral density, PSD) or in the time domain (autocorrelation function). Moreover, we will show how these different approaches (DC and AC modes) allow us, assuming predictable the applied electric field (here generated by plane parallel electrodes), to provide accurate estimation (3%) of the net charge carried by the microparticle. Vice versa, we also demonstrate how, once predetermined the charge, the trapped particle acts as a sensitive probe to reveal locally electric fields generated by arbitrary electrode geometries (in this work, wire‐tip geometry).     

锌掺杂对TiO2染料敏化电池光阳极中电荷俘获态分布及电子复合过程的影响

基于瞬态光电压和瞬态光电流技术研究了锌掺杂的TiO2染料敏化太阳能电池中电子复合及传输的动力学行为.通过实验获得了不同阳极掺杂条件下的电子复合时间常数与电子收集时间常数,考察了锌掺杂对电池阳极材料导带能级和电子俘获态的影响.研究结果表明,锌的掺杂在提高TiO2导带能级的同时延长了俘获态电子的复合时间常数,从而大大提高了电池的开路电压.     

FeO/Pt(111)与FeO2/Pt(111)的几何、电子结构及表面氧活性的第一性原理研究

采用密度泛函理论系统研究了超薄氧化物膜/金属体系FeO/Pt和FeO₂/Pt及其表面不同区域(FCC,HCP和TOP)的几何结构、电子性质及氧的活性.研究发现,表面O-Fe高度差δ_z作为一个重要的特征结构参数直接影响局域表面静电势和表面氧的结合能: δ_z越大,静电势越大,氧的结合能越弱.计算发现,在FeO/Pt体系中,δ_z顺序为FCC > HCP > TOP,而FeO₂/Pt中是FCC > TOP > HCP.此外,在FeO/Pt中,电荷转移方向是从氧化物膜到衬底,Fe的表观价态为+2.36,表面功函较纯Pt(111)的变化可忽略; 而FeO₂/Pt中,电荷转移的方向是从衬底到氧化物,Fe的表观价态为+2.95,表面功函较纯Pt增加1.24 eV.进一步分析了电荷转移和表面偶极对电子性质的作用机制.这些研究结果对于认识超薄氧化物薄膜对表面几何结构、电子性质、表面氧活性的调制具有重要的启示意义.     

N3/Al2O3/N749交替组装结构拓宽准固态染料敏化太阳能电池光响应范围和界面修饰效果

研究了染料敏化太阳能电池(DSCs)中N3/Al₂O₃/N749交替组装结构的作用. 该结构使用Al₂O₃作为介质层吸附第二层染料, 可以有效拓宽DSCs的光响应范围, 提高电池的光电转化效率. UV-Vis 吸收光谱和单色光转换效率(IPCE)谱测试结果表明, 相对于单一染料, 使用交替组装结构的电池光响应范围变宽. 电流-电压(I-V)曲线结果表明, 该结构有效增加了DSCs 电池的光电转化效率, 从单一N3 和N749 染料的4.22%和3.09%增加到了5.75%, 分别增加了36%和86%. 为了研究该结构的作用机理, 本文对其界面修饰作用及界面电子过程进行了讨论. 暗电流测试结果表明交替组装结构可以有效阻止电荷复合过程; 电化学阻抗谱(EIS)结果表明在黑暗条件下, N3/Al₂O₃/N749结构可以提高界面电阻, 从而抑制电荷复合过程; 本文建立了等效电路模型, 并使用该模型讨论了交替组装结构的界面电子过程; 调制强度光电流谱(IMPS)和调制强度光电压谱(IMVS)的结果表明该结构可以提高电子寿命和改善电子扩散.     

Rational design of donor–π–acceptor n-butyl-1,8-naphthalimide-cored branched molecules as charge transport and luminescent materials for organic light-emitting diodes

Four D–π–A bipolar molecules with n-butyl-1,8-naphthalimide (BNI) fragments as acceptors, acetylenes as π-spacers, and different aromatic groups as donors have been designed to explore their optical, electronic, and charge transport properties as charge transport and luminescent materials for organic light-emitting diodes (OLEDs). The frontier molecular orbitals (FMOs) and local density of states analysis have turned out that the vertical electronic transitions of absorption and emission are characterized as intramolecular charge transfer (ICT). The calculated results show that their optical and electronic properties are affected by the different donors of the bipolar molecules. Our results suggest that D–π–A 1,8-naphthalimide derivatives with donors triphenylamine (1), 1-nitrobenzene (2), anisole (3), and 4-phenylbenzo[c][1,2,5]thiadiazole (4) fragments are expected to be promising luminescent materials. Furthermore, 2–4 are expected to be promising candidates for both electron and hole transport materials as well as potential ambipolar charge transport material, whereas BNI and 1 can serve as hole transfer materials only. We have also predicted the mobility of 4 with better performance in three different space groups. On the basis of investigated results, we proposed a rational way for the design of charge transport and/or luminescent materials simultaneously.     

A two‐step reaction scheme leading to singlet carbene species that can be detected under matrix conditions for the reaction of Zr(3F) with either CH3F or CH3CN

The results obtained from CASSCF‐MRMP2 calculations are used to rationalize the singlet complexes detected under matrix‐isolation conditions for the reactions of laser‐ablated Zr(³F) atoms with the CH₃F and CH₃CN molecules, without invoking intersystem crossings between electronic states with different multiplicities. The reaction Zr(³F) + CH₃F evolves to the radical products ZrF· + ·CH₃. This radical asymptote is degenerate to that emerging from the singlet channel of the reactants Zr(¹D) + CH₃F because they both exhibit the same electronic configuration in the metal fragment. Hence, the caged radicals obtained under cryogenic‐matrix conditions can recombine through triplet and singlet paths. The recombination of the radical species along the low‐multiplicity channel produces the inserted structures H₃C? Zr? F and H₂C?ZrHF experimentally detected. For the Zr(³F) + CH₃CN reaction, a similar two‐step reaction scheme involving the radical fragments ZrNC· + ·CH₃ explains the presence of the singlet complexes H₃C? Zr? NC and H₂C?Zr(H)NC revealed in the IR‐matrix spectra upon UV irradiation. © 2014 Wiley Periodicals, Inc.     

共存牺牲剂对染料敏化TiO_2纳米晶体系电子传输的影响

采用卟啉染料敏化TiO2纳米晶在可见光条件下(λ390 nm)进行水分解制氢.考察了不同牺牲剂———甲醇(MeOH)、三乙醇胺(TEOA)及其混合物对体系析氢效率的影响.通过荧光猝灭及光电化学性能分析发现,激发态染料与TiO2之间的电子转移极大地受到添加的牺牲剂的影响,而体系的pH值对其影响不大.     

具有增强电荷转移驱动的磺酸基功能化g-C3N4光催化剂的设计合成及应用

随着全球环境问题日益严重以及能源需求的不断增长,人们对高效环境修复与能源转换技术的需求日益增强.以半导体材料为光催化剂,可将可再生的太阳能转化为化学能,有望成为解决人类面临的能源和环境问题的有效途径.其中,开发高效稳定的光催化剂是该技术得以实际应用的关键.近几十年,研究人员开发出多种半导体材料并应用于光催化研究.其中,具有可见光响应的有机非金属光催化剂石墨相氮化碳(g-C₃N₄)因其稳定的分子结构,较小的禁带宽度(~2.7 e V)以及合适的能带结构而备受关注.然而,与大多数半导体光催化剂相似,由于传统g-C₃N₄上的光生电子和空穴极易复合,表面催化活性位点较少,可见光响应范围较窄,使得其催化效率不高.基于g-C₃N₄独特的有机分子结构,通过引入功能化的特定基团以优化g-C₃N₄的电子能带结构,促进载流子传输,拓展可见光响应范围,是提高其光催化效率的有效途径.已有研究表明,在各种功能化官能团中,具有强电负性的含氧基团对g-C₃N₄的Melon单元优化是非常有效的.因此,本文通过g-C₃N₄与氨基磺酸间的简单固相热反应成功合成了磺酸基功能化的g-C₃N₄纳米片(SACN),并实现了同步增强的相互作用.根据固体强酸特性,氨基磺酸可以在热处理的辅助下对g-C₃N₄进行酸刻蚀,从而增加其比表面积以及表面催化活性位点.更重要的是,理论计算与实验表征结果表明,磺酸基团的吸电子诱导效应所产生的电荷驱动力可极大改善g-C₃N₄的电荷转移动力学,有效抑制了它们的再结合.此外,吸电子诱导效应还可促进g-C₃N₄的局域电子再分布,进而降低g-C₃N₄的导带电位,增强光诱导电子的还原能力.光催化性能测试结果表明,SACN-400样品(前驱体中氨基磺酸加入量为400 mg)在光催化分解水制备氢气以及光降解传统污染物领域展现出较好的性能,其在入射光波长为420±15 nm时的产氢表观量子效率为11.03%.综上,本文为设计合成具有较高产氢性能以及污染物降解效率的石墨相氮化碳基光催化剂提供了一种简便有效的策略.     

硫化钴装饰BiVO4光阳极提升其光电化学水分解性能

太阳能驱动的光电化学(PEC)水分解可以有效地将太阳能转化为化学能,作为解决环境排放和能源危机最具前景的途径之一,已经引起了科学界的广泛关注.PEC水分解系统由两个半反应组成:在光阳极上的析氧反应(OER)和光阴极上的析氢反应(HER).PEC系统的太阳能转化效率主要由光阳极/电解质界面的OER过程所决定,这是一个非常复杂且涉及质子偶联的多步四电子转移过程.钒酸铋(BiVO₄)是应用于PEC水分解的典型且具有实际应用前景的光阳极材料之一.然而,由于不良的表面电荷转移、电荷在光阳极/电解质结面处的表面复合以及缓慢的OER动力学等因素,导致BiVO₄的PEC性能受到严重限制.本文开发了一种新颖有效的解决方案,以低成本、高电导率和具有快速电荷转移能力的硫化钴装饰来提升BiVO₄光阳极的PEC活性,X射线多晶衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等表征,研究结果表明CoS成功装饰于BiVO₄表面.采用紫外-可见吸收光谱(UV-VisDRS)研究了BiVO₄和复合光阳极CoS/BiVO₄的光学性质,结果表明,与纯的BiVO₄相比,CoS/BiVO₄光阳极在可见光范围内光吸收能力有所增强.将制备的BiVO₄和CoS/BiVO₄光阳极应用于PEC分解水实验中,结果表明,相对于1.23 V可逆氢电极,在光照下,CoS/BiVO₄光阳极的光电流密度显著提升,可高达3.2 m Acm^-2,是纯BiVO₄的2.5倍以上.与纯BiVO₄相比,CoS/BiVO₄光阳极的起始氧化电位显示出负向偏移0.2 V,表明析氧过电势得到有效减小.入射光子转换效率(IPCE)测试结果表明,CoS/BiVO₄光阳极的入射光子转换效率在500 nm之前的可见光范围内得到明显提升,其中,CoS/BiVO₄的IPCE值在380 nm处达到最大.此外,由于CoS的装饰作用,CoS/BiVO₄光阳极的电荷注入效率和电荷分离效率均得到较大的提升,分别达到75.8%(相较于纯BiVO₄光阳极的36.7%)和79.8%(相较于纯BiVO₄光阳极的66.8%).电化学阻抗谱(EIS)测试结果表明,通过CoS的装饰,CoS/BiVO₄光阳极的界面电荷转移电阻得到有效降低,证明其界面电荷转移动力学得到有效提升.光致发光光谱测试结果表明,CoS的装饰显著提高了BiVO₄的光生电子-空穴对的分离效率,进一步证明BiVO₄表面的CoS装饰在其PEC分解水中起着非常积极的作用.本文为通过表面修饰设计应用于PEC水分解的有效的光阳极提供了新思路.     

The Charge Transfer Complex between 2, 3-diamino-5-bromopyridine and Chloranilic acid: Preparation,Spectroscopic Characterization,DNA binding,and DFT/PCM analysis

A charge transfer hydrogen bonded complex was prepared and experimentally explored in an acetonitrile (ACN) medium between the proton acceptor (electron donor) 2, 3-Diamino-5-bromopyridine and the proton donor (electron acceptor) chloranilic acid. The stoichiometry of the charge transfer complex is 1:1. The Benesi-Hildebrand equation is used to calculate the molar absorptivity (ε_CT), association constant (K_CT) and other spectroscopic physical characteristics. The solid compound was synthesized and studied using several spectroscopic methods. The presence of charge and proton transfers in the resultant complex was supported by ¹H NMR, FT-IR and SEM-EDX investigations. The complex DNA binding ability was investigated using electron absorption spectroscopy, and the CT complex binding mechanism is intercalative. The intrinsic binding constant (K_b) value is 5.2 × 10⁶M?1. The good binding affinity of the CT complex makes it potentially suitable for usage as a pharmaceutical in the future. Molecular docking calculations have been performed between CT complex and DNA (ID = 1BNA) to study the CT-DNA interaction theoretically. To corroborate the experimental findings, calculations based on DFT were carried out in the gas and PCM analysis where the existence of charge and hydrogen transfers. Finally, good agreement between experimental and theoretical computations was observed confirming that the basis set used is appropriate for the system under examination.